Plug and Play Pre-installed GM VCX Nano Kit

FOR 2010 AND NEWER GM VEHICLES 

-Please DO NOT purchase this tablet if you intend to use it for TECH2WIN. The installation process for tech2win is complicated, which is why I don't have it included as one of the installed software listed below guaranteed to work. Tech2Win requires all other software to be uninstalled before installing the VCX Nano Tech2Win. It also requires Windows 7 as well as the OS to be downgraded from a 64 bit OS to a 32 bit OS. Tech2Win will require a seperate computer that only runs Tech2Win and nothing else.

-Again, please do not purchase if you intend to use this for Tech2Win. 

-GM Vehicles 2009 and older require Tech2Win for programming and diagnostics. My current setup (GDS2 and Techline Connect) will work on GM Vehicles 2010 and newer for programming, diagnostics, and code clearing. 

-VXDIAG VCX NANO USB Version for GM/OPEL Vehicles!

-Alot of users complain about the hassle of installing VCX Nano software, and most complain about the installation failing and not figuring out how to get it working. All of that has been taken care of for you. This VCX Nano COMES WITH A 

64GB MICROSOFT SURFACE 3 WINDOWS 10 TABLET WITH THE MOST COMMON VCX NANO SOFTWARE PRE INSTALLED AND READY TO GO!

-I mainly used this tool to reflash the hybrid powertrain control modules on Chevy Volts to eliminate the P0AFA error code and get the cars running again. I also used it to re-enable and bring back to life Chevy Volts that were disabled due to being rear ended 

by using the "Reset High Voltage Disable Request After Crash Event Detected" command/procedure.

-I tried as hard as I could to make this as user friendly and as plug and play as

possible for the average Joe. I also included pretty detailed step by step instructions

that I made myself for the most common functions.  

-If you own a Chevy Volt with the POAFA error code, the Service High Voltage Charging System error code, or if you own a Chevy Volt or Hyrbid vehicle with the High Voltage battery auto disabled due to a crash detected, i've also

included additional instructions with the main instructions on how to use this tablet to clear those codes.

-For each order, it takes me about 3+ hours to install all programs correctly, test, and also get each tablet to an Average Joe user friendly state. I get to work immediately after each order and usually ship the next day or the day after. I am also available via eBay messages for any questions you may have, but the instructions should be enough for most. If you have any issues down the road software wise, that cannot be resolved through messages, you can ship me back the tablet and once I receive it i'll have another one sent out to you.

• Microsoft Surface tablet has a yellow tint, on white backgrounds, mostly around the corners of the screen. 

• Microsoft Surface tablet also has very visible screen stars as shown in image #8. Stars are most visible on black backgrounds.

Comes with:

1. VCXDIAG VCX NANO Diagnostic tool

2. Microsoft Surface 3 Windows 10 tablet

3. USB Cable (serves as both data and charging cable)

4. Generic Tablet charger block (Charger block supplied may be different from charger shown in pictures).

5. Custom printed step by step instructions. 

Installed Software:

1. GDS2 (Free Bi-Directional OBD code scanner, live data viewer, diagnostics, dealer code reader and code clearer with special functions)

2. VX Manager (For updating VCX Nano software with free lifetime updates)

3. Techline Connect and Service Programming System (SPS2) (GM's proprietary software for programming, flashing, updating and upgrading vehicle computer modules - Requires a 2 year, $45 subscription, to AC Delco TDS for access to GM servers. During these 2 years you can flash, reflash, and update as many modules as you would like. Instructions are included on how to purchase the subscription and link it to the VCX Nano).

4. NO TECH2WIN (Do not purchase if you want to use tech2win, it won't work with the setup I have).

About this item

• 🚗[Vehicle Coverage] Installation Tips: Please turn off anti-virus software before install. VXDIAG VCX NANO fully compatible with SAE-J2534-1 & SAE-J2534-2. All current and most legacy vehicle protocols: CAN, UART, KW2000, Class2, GM LAN, etc.

• 🚗[Functional] ●USB vehicle-to-PC connectivity●Supports Windows,XP●CE and FCC compliance for hardware●Firmware Updatable. 【SPS】Service Programming System: ◎Passthrough programming on GM past model and Global A vehicles◎Increase reprogramming speed 20-70% and get ready to service new models.

• 🚗[GDS] Global Diagnostic System: ◎New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles. ◎GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.

• 🚗[Efficient&Convenience] Quick access to vehicle data for maintenance or management reports.Quickly attaches to vehicle's diagnostic connector. Mixed fleet capabilities with broad protocol support.May be used with desktop PC or laptop. make sure your computer at least 4GB.Tech2win software only installed on 32bit computer and on physical system.Please download the latest vxmanager from vxdiag official website.

• 🚗 Use new vxmanager to update firmware and driver and then update your device authorization. GDS software need install on 64bit computer and use vmware machine. If you have any installation problems, download the installation manual. Or please contact us at any time. We can provide technical support and help you install software online

Product Description

VXDIAG VCX NANO Box is PC-to-vehicle interface compatible with multiple software applications, minimizing your investment in multiple brand-specific diagnostic interfaces. This VXDIAG VCX NANO support GM Tech2Win and GDS2, It can be used instead of GMs original GM MDI tool.

Tech2Win Function

Tech2Win, an application version of the Tech 2 and CANdi (Control Area Network diagnostic interface) moduleTech2Win can be used during a vehicle road test, offering a larger screen with all of the Tech 2 tool functionality. The Tech2Win application offers all of the features and functions of the Tech 2 for Opel, Saab etc.

GDS 2 provides the following capabilities in multiple languages:

• Read codes, code status, Freeze Frame data and Clear Codes

• Read VIN, ECU part numbers and software numbers

• Record, store and replay Stored data

• Control and monitor Output Control functions

• Configure and Reset functions

• Record or display history of the previous vehicle diagnostic sessions

Service Programming System

For pass-through programming of electronic control units on all vehicles built since 1996 and future model releases. The VCX Nano Prime GM KIT is between 20% and 70% faster than Tech 2.For example, on a new Tahoe hybrid with 7 ECUS, it would normally take 2 full hours to reprogram. But, with VCX Nano the process is completed in just 45 minutes. That’s a 64% difference and means you could service 10vehicles rather than 4in an 8-hour day! The potential to increase revenues is dramatic.

New Vehicles Model list

VCX Nano Prime GM KIT is the only full-spectrum diagnostic and reprogramming tool capable of servicing new Delta and Epsilon vehicles (with auxiliary CAN bus that cannot be serviced by Tech2).Below is the list of vehicles being delivered this year that will rely exclusively on this tool for service.